Analysis Audio Epsilon, Full Range Ribbon Planar Speaker System
DemoItem no. ANAEPSn1
Demo Ready in Stock, Ask for Delivery Time
Request informationDescription
Analysis Audio Epsilon, 2-Way Magnetostatic Loudspeaker
Retail price: € 13,800.00 per set
Surcharge for wood finish: 10% Surcharge for high-gloss finish: 15% Surcharge for high-gloss wood finish: 25%
Any RAL colour in the shiny matte acrylic finish is possible at no extra charge. Let us know which RAL colour you want, and we can order the loudspeakers in that colour for you.
EN.
General: 2-Way full range magnetostatic ribbon loudspeakers.
Technology: The Analysis Audio Epsilon is the bigger sibling of the Omicron, the smallest loudspeaker from Analysis Audio from Greece. The Epsilon has been completely redesigned and now has a single wiring connection, and the crossover filter has been changed. Like all other loudspeakers from Analysis Audio, the Epsilon is a 2-way loudspeaker with a very low crossover point for the tweeter. From as low as 650 Hz, the super-fast ribbon midrange/tweeter takes over from the ribbon woofer/midrange unit. So there is no filtering in the sensitive area around 2500 Hz, which is common with a 2-way loudspeaker. The filter itself is a 6 dB filter, with a minimal number of components and minimal phase shifts in the transition range. The impedance of the Epsilon is around 5 ohms and very flat, so it is an easy load for the amplifier used. The tweeter itself is a true work of art. It is a pure ribbon 105 cm long and almost 4 cm wide, held in Kapton. Ribbons are known for sounding super-fast, transparent and uncoloured, and the ribbon midrange/tweeter of the Epsilon is among the best we have ever heard. With normal dome tweeters, the dome is driven at its edge, and all forces spread through the diaphragm. With the Epsilon ribbon this is not the case. The diaphragm is driven across its entire surface. That is also the case with the bass/midrange panel. Normal woofers and midrange drivers are also usually driven powerfully at the centre, with a voice coil, and that creates stress in the cones. Not so with Analysis Audio. In fact, both diaphragms of all Analysis Audio loudspeakers are the voice coil itself, so no cones or domes are driven at all. The woofer panel itself is also a ribbon, but the panel here is trapezoidal. That is special, and it avoids resonances and standing waves in the foil. Even more special is that the woofer/midrange ribbon is not stretched tightly in the frame, but is suspended from a kind of rubber edge. The panel can therefore move very freely, and as a result the Epsilon can also reproduce remarkably deep bass. The Epsilon is relatively compact, but clearly larger than the Omicron, and measures 132 cm high by 61 cm wide and 6 cm deep. The sensitivity is certainly good at 86 dB, and the Epsilon already performs sublimely with amplifiers from around 2 x 50 watts, but for the Epsilon we recommend a somewhat more powerful amplifier. The maximum power handling of the Epsilon is 250 watts, so the Epsilon can also play loudly, although that is not necessary. Because of its direct radiation, the entire musical reproduction is also fully presented at lower volumes. The Analysis Audio Epsilon is a high-end ribbon loudspeaker from Analysis Audio in the upper segment, and it sounds fantastic, just like the other speakers from this manufacturer.
Listening : The Analysis Audio Epsilon is clearly a bigger brother of the Omicron. The Epsilon sounds essentially the same, but the Epsilon plays noticeably deeper in the bass, the soundstage is a bit larger and the Epsilon can generally play loud a bit more easily. Straight out of the box the new Epsilon already sounds great, but it is clear that these ribbon loudspeakers still need to break in, just like any other high end loudspeaker. After 100 hours of play the Epsilon is fully loosened up. The Epsilons play exceptionally airy and 3D, and what stands out immediately is the beautiful deep bass and the very fine dynamic reproduction. You hear things on this loudspeaker that you have never heard before. The Epsilon is a dipole loudspeaker and therefore must stand at least 80cm from the rear wall if you want to listen seriously. When listening to the loudspeakers from Analysis Audio, you notice that they are cabinet-less designs. Cabinet resonances are completely absent, and that gives a very fine and relaxing sound, there is nothing that disturbs. All that remains is the perfect and pure musical presentation, and that is very special to hear. The Epsilon can play loud, delivers a superb bass, and you can really play all kinds of music with it. The Analysis Audio Epsilon is permanently on demo at Ohm-Audio. Make an appointment and come and listen to them.
Specifications of these loudspeakers :
Brand : Analysis Audio Greece
Model : Epsilon
Type : 2-Way Floorstanding loudspeaker
Finishes : Shiny Matte Black
Surcharge : High gloss (15% surcharge), Veneer (10% surcharge), High gloss wood (20% surcharge)
Ohm-Audio B.V. warranty : 60 Months
Input terminal : Singlewiring Inputs
Connectors : WBT for Spades and/or Banana plugs
Crossover frequency : 650Hz 6dB / Octave
Weight : 36 Kg Net per Loudspeaker
Dimensions : 132cm high x 61cm wide x 6cm deep. Feet 50cm.
Efficiency : 86dB/m 1 Watt
Impedance : 5 Ohm Nominal
Trade-in : We are happy to discuss the trade-in of your old equipment
Review by 6Moons : Analsysis Audio Epsilon Review
