Gigawatt PowerSync Bulk Powercord, OFHC Copper, 2.0mm² Semi-Solidcore

Gigawatt PowerSync Bulk Powercord, OFHC Copper, 2.0mm² Semi-Solidcore

Retail price per Meter: € 49,00

ENG.

General: The Gigawatt PowerSync Bulk powercord is a high-quality power cord that is cut per meter from the roll. Each conductor in the Gigawatt PowerSync Bulk consists of 10 strands of OFHC copper that together provide a total cross-sectional area of 2.0mm². It is therefore a semi solidcore cable, not hundreds of thin strands, but instead 10 thick OFHC copper strands. This gives you the sound properties of solidcore conductors, but the flexibility of a stranded cable. The Gigawatt PowerSync Bulk can be used to make your own power cords, which is what the PowerSync Bulk was made for. But it is also possible to use the PowerSync Bulk as an installation cable, then it is a more flexible alternative compared to the rigid Gigawatt LC-Y Evo which uses 4.0mm² solidcore conductors. As an installation cable, we still recommend the Gigawatt LC-Y Evo, but in buildings where the LC-Y Evo has to be pulled through a conduit with many sharp bends etc., the Gigawatt PowerSync Bulk is an excellent alternative.

For making power cords you can order NL Schuko, C15 IEC or C19 IEC connectors from Gigawatt. These are available with nickel-plated connectors, gold-plated connectors or Rhodium connectors.

The Gigawatt PowerSync Bulk also contains 7 loose, unshielded copper strands, which are connected to the cable shielding. The purpose is to connect these on the outlet side to the ground conductor, then you make the shielding actively connected to ground. On the other side of the cable you cut off these 7 loose strands so you don't experience ground loop noise. If you use the Gigawatt PowerSync Bulk as an installation cable, connect the loose strands to ground on the meter box side, on the other side you cut off the unshielded strands again. If you want to use the Gigawatt PowerSync Bulk as a power cord, connect the unshielded strands to the NL Schuko connector which goes into the outlet, at the other end where you mount an IEC connector, cut off the unshielded wire again.

Sound characteristics: The Gigawatt PowerSync Bulk sounds very expressive and transparent, but with a refined and natural character. Price to quality, an exceptionally well-designed cable. As an installation cable we still recommend a pure solid core cable such as the Gigawatt LC-Y Evo, but the Gigawatt PowerSync Bulk is not far behind.

Specifications of this cable:

Brand: Gigawatt Poland

Model: PowerSync Bulk

Type: Power cord for DIY or In-Wall applications

Conductors:

Phase: 1 x 2.0mm² Pure OFHC Multi Strand (10 strands)

Neutral: 1 x 2.0mm² Pure OFHC Multi Strand (10 strands)

Ground wire: 1 x 2.0mm² Pure OFHC Multi Strand (10 strands)

Shielding wire: 7 x OFHC Copper wire, connected to the shielding for active grounding.

Shielding: Aluminum Foil

Dielectric: PVC

Manufacturer Website: Gigawatt PowerSync Bulk